|
Post by mike on Oct 3, 2014 9:57:07 GMT
HELP!
Being a smart a.... some time ago I dismantled the front grill on my 67 Morris to have all the slats polished. This was done beautifully and I have stored away ready to rebuild. Last night thought that I would reassemble - now have 2 side brackets, 2 uprights and a lot of slats!
Does anyone out there have a picture of how it all goes back to together- as its pop riveted adjustment is difficult. The uprights are stepped and seem to be fitted one way. A picture from the rear and front would be of great assistance!
Many thanks mike
|
|
|
Post by cptkennykidna on Oct 3, 2014 12:24:13 GMT
the aluminium slats have the part numbers stamped on the back just off centre, the low number goes to the top. that is part number for e.g. ARH 2246 goes to top 2247 is second from top 2248 next & 2249 = bottom. hope that helped you cptkennykidna
|
|
|
Post by Nick RS on Oct 3, 2014 16:20:37 GMT
Mike, This may or may not be of some use. Nick
|
|
|
Post by indianajones on Oct 4, 2014 1:39:34 GMT
Hope you get/got it sorted Mike. I wasn't aware that the grill could be broken down like that!
-Andrew
|
|
|
Post by mike on Oct 5, 2014 8:03:55 GMT
Wow thanks guys made the thread more in hope but will try today if I have permission from higher command! Mile
|
|
|
Post by mike on Nov 3, 2014 9:49:03 GMT
Update- grill assembled looks good however I seem to be missing the centre clip for the lower trim [number 10 in Nicks parts list] dont suppose anyone out there has a spare?
In hope best wishes Mike
|
|