|
|
Post by bullyboy on Nov 4, 2012 17:55:59 GMT
Hi I have been doing some work in the boot of the Morris, i am trying to find out what should fit over the access holes to the rear of the lights, when i got it had carpet stuck to it with press studs and a bit of a mess. If anyone could help with a picture or if you have what ever should be there for sale i would appreciate it hope that makes sense. Please see pic below  Cheers Paul |
|
|
|
Post by Penguin45 on Nov 4, 2012 18:15:24 GMT
  Here's what I did with mine. The holes are for "Spire" clips. Looks quite tidy. Chris. |
|
|
|
Post by bullyboy on Nov 4, 2012 18:37:00 GMT
Hi Chris
Thanks for that, thats what i was thinking of doing or something similar, i was hoping that i could put it back to how it should be from factory, but i could do with a pattern, hopefully going to NEC on the 17th. Perhaps the cars on the crab stand will have the originals.
Paul
|
|
|
|
Post by Penguin45 on Nov 4, 2012 20:19:46 GMT
I've been through the body parts listing and the panels aren't even listed. Have you got the corner pieces?   These aren't in the listing either.......  Chris. |
|
|
|
Post by threelitre on Nov 4, 2012 23:19:34 GMT
These have only been fitted to earlier Mk2 cars. My father's 1970 1800 S does not have them anymore. From the factory the our Austin 1800 S came with a grey vinyl covering for floor and side-walls. In the second picture from Chris, where he shows the open flap, you can see a press stud above the opening. This is where in my father's car the side trim was held to be released to access the cavity. I think it was glued in place everywhere else.
Regards,
Alexander
|
|
|
|
Post by bullyboy on Nov 5, 2012 17:45:15 GMT
Hi
Chris yes i have them corner bits just about to spray them.
Alexander thanks for the info the mystery continues
PAul
|
|
|
|
Post by bullyboy on Nov 19, 2012 8:09:20 GMT
|
|
