TECHNICAL ADVICE DISCLAIMER

Much of this forum illustrates graphic scenes of rust removal and subsequent welded repairs, as well as mechanical, hydraulic and electrical restoration. If you choose to follow up any of the work illustrated, be sure in your own mind that you have the skills to perform the work to a safe standard. If you have any doubts at all we suggest that you seek professional advice. The Landcrab Forum and its members will not be held liable for the consequences of any incorrect repairs based on advice offered here. Members are asked to ensure that to the best of their knowledge all advice that they post is accurate and provide references where available. In the event of any uncertainty this should be made clear in the post.

Reply

BANDIT 1 MORRIS 1800 WELDING.

« Prev
1
Next »

tripplescrew
Member

Posts: 61

BANDIT 1 MORRIS 1800 WELDING. Dec 5, 2015 17:03:28 GMT bandit1 likes this

Quote

Post by tripplescrew on Dec 5, 2015 17:03:28 GMT

This is the Morris 1800 of Chris Ledger having some rear inner & outer weld repairs. The previous owner an elderly lady had entrusted a local garage to maintain & repair her car. Seems they like to use body filler rather than weld repairs.

tripplescrew Member Posts: 61	BANDIT 1 MORRIS 1800 WELDING. Dec 5, 2015 17:08:05 GMT bandit1 likes this Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by tripplescrew on Dec 5, 2015 17:08:05 GMT Here are a few more pics the lower rear arch was full of filler Pete Allen set about making a new arch.

Penguin45 Administrator Admin Posts: 4,517 Attribute: Compulsive rust poker.	BANDIT 1 MORRIS 1800 WELDING. Dec 5, 2015 18:20:27 GMT bandit1 likes this Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Penguin45 on Dec 5, 2015 18:20:27 GMT Looks like a good solid job. I've put the two posts together for continuity. Chris.
	What would you like welding up?