TECHNICAL ADVICE DISCLAIMER

This forum contains extensive guides, advice and solutions to repairing Landcrabs. Bear in mind that most here are amateur repairers and restorers and that information and advice is freely given with good intent. However, be aware that it is your choice whether or not to act upon that information. If you have any doubts as to your own abilities to carry out a repair to a suitable safe standard or question the accuracy of any advice offered, we suggest you seek professional assistance. The Landcrab Forum and its members will not be held liable for the consequences of any incorrect repairs based on advice offered here. Members are asked to ensure that to the best of their knowledge all advice that they post is accurate and provide references where available. In the event of any uncertainty this should be made clear in the post.

Pipe Flaring.

new

« Prev
1
Next »

Penguin45
Administrator

Admin

Posts: 4,517
Attribute: Compulsive rust poker.

Pipe Flaring. Oct 15, 2015 17:16:26 GMT

Quote

Post by Penguin45 on Oct 15, 2015 17:16:26 GMT

I have a pipe flaring kit which I have used on and off for many years for brake pipes. I know exactly how much pipe to leave proud to form the flare. My question is that I want to form flares on some 15mm pipe, so how much pipe do I need to leave protruding?

Thanks,

Chris.

What would you like welding up?