Post by Penguin45 on May 8, 2015 16:02:42 GMT
Does anyone know the size of the thread which the air filter retaining bolt screws on to? A 5/16" UNC die is a sloppy fit, so I'm assuming that it's not correct.
Chris.
Chris.
|
|||
|
This forum contains extensive guides, advice and solutions to repairing Landcrabs. Bear in mind that most here are amateur repairers and restorers and that information and advice is freely given with good intent. However, be aware that it is your choice whether or not to act upon that information. If you have any doubts as to your own abilities to carry out a repair to a suitable safe standard or question the accuracy of any advice offered, we suggest you seek professional assistance.
The Landcrab Forum and its members will not be held liable for the consequences of any incorrect repairs based on advice offered here. Members are asked to ensure that to the best of their knowledge all advice that they post is accurate and provide references where available. In the event of any uncertainty this should be made clear in the post.