|
|
Post by bullyboy on Aug 9, 2014 15:26:41 GMT
Hi All
I am rebuildng my Morris 1800s mk11 1969,does anybody know of or have a nearside rear wheel arch/panel, not bothered if its cut from a scrap vehicle,i can rebuild it but i need one to carry on with the rebuild. I am will to pay and pick up if not too far.
Paul
|
|
|
|
Post by tripplescrew on Aug 9, 2014 19:24:51 GMT
Give Keith a ring at Balby motor spares in Doncaster he has several Landcrabs in his yard for breaking.He will post parts out. Ring 01302 858805 or try Ray House who has new body panels for our cars his number is 07891888685. You are aware that a front O/side arch can be used for the rear n/side & same for the front n/side can be used for the rear O/side.
|
|
|
|
Post by bullyboy on Aug 11, 2014 6:57:32 GMT
Give Keith a ring at Balby motor spares in Doncaster he has several Landcrabs in his yard for breaking.He will post parts out. Ring 01302 858805 or try Ray House who has new body panels for our cars his number is 07891888685. You are aware that a front O/side arch can be used for the rear n/side & same for the front n/side can be used for the rear O/side. Thanks for that, i will phone Keith this week. I know about Ray but he his miles away and too bloody expensive. I got 2 old front wings of Tony Woods to do what you are saying, but the profiles are slightly different and needs modifying. I think i need to replace the whole of the rear arch and lower parts, would be easier with the panels, also the inner arch is poor but i know the new bits are pricey. I may give Tony a bell to see if he can help. Paul |
|
